Butt Welding Machines
63 × 160 Semi-Hydraulic Butt Welding Machine
A light, practical entry model for site and workshop. Runs on single-phase 230 V.
Ø63 – Ø160 mm
Product Catalogue
Our complete range of machines, fittings and equipment. Add products to your quote list and request prices with a single form.
Butt Welding Machines
63 × 160 Full Hydraulic Butt Welding Machine
Full-hydraulic comfort for small diameters: digital heater control and remote handset.
Ø63 – Ø160 mm
Butt Welding Machines
75 × 250 Butt Welding Machine
For the most widely used diameter range in water and gas networks. PVDF compatible.
Ø75 – Ø250 mm
Butt Welding Machines
90 × 315 Butt Welding Machine
Welds up to Ø315 mm on single-phase power; easy to run on site with a generator.
Ø90 – Ø315 mm
Butt Welding Machines
180 × 500 Butt Welding Machine
Three-phase, wheeled-chassis machine for medium-to-large diameters on main lines.
Ø180 – Ø500 mm
Butt Welding Machines
315 × 630 Butt Welding Machine
Powerful, well-balanced frame for large-diameter welding on transmission and wastewater lines.
Ø315 – Ø630 mm
Butt Welding Machines
500 × 800 Butt Welding Machine
Safe welding of thick walls with 160 bar working pressure.
Ø500 – Ø800 mm
Butt Welding Machines
800 × 1200 Butt Welding Machine
The largest in the series: for main transmission and outfall lines up to Ø1200 mm.
Ø800 – Ø1200 mm
Electrofusion & FKS Machines
8000 F Electrofusion Welding Machine
For all electrofusion fittings from Ø20 to Ø1200 mm, IP54 protected.
Ø20 – Ø1200 mm
Electrofusion & FKS Machines
FKS & Corrugated Pipe Welding Machine
For joining FKS and corrugated pipes with embedded resistance wire by electrofusion.
Ø400 – Ø2000 mm
Electrofusion Fittings
EF Coupler
Straight electrofusion joint between two PE pipes of the same diameter.
Ø20 – Ø1000 mm
Electrofusion Fittings
EF Tapping Tee
Service / branch connection from a pressurised main. Types A, B, C, D.
Ø40 – Ø355 main
Electrofusion Fittings
EF Valve Tapping Tee
Tapping tee with integrated valve; the branch can be shut off without a separate valve.
Ø63 – Ø280 main
Electrofusion Fittings
EF Saddle
Electrofusion saddle for branch outlets on the main. Types A, B, C, D.
Ø40 – Ø450 main
Electrofusion Fittings
EF Repair Saddle
Local repair of damaged pipe without cutting the line.
Ø63 – Ø450 mm
Electrofusion Fittings
EF Equal Tee
Three-way electrofusion connection of equal diameter.
Ø25 – Ø315 mm
Electrofusion Fittings
EF Reducer
Electrofusion transition between two pipes of different diameters.
Ø32×20 – Ø125×110 mm
Butt Fusion Injection-Moulded Fittings
Reduced Tee
Reducing tee for a smaller-diameter branch from the main.
Ø63×40 – Ø630×315 mm
Butt Fusion Injection-Moulded Fittings
Reducer
Butt-fusion diameter transition fitting in a wide range of sizes.
Ø32×20 – Ø900×800 mm
Butt Fusion Injection-Moulded Fittings
Elbow 90°
Injection-moulded 90° butt-fusion elbow.
Ø20 – Ø315 mm
Butt Fusion Injection-Moulded Fittings
Elbow 45°
Injection-moulded 45° butt-fusion elbow.
Ø20 – Ø315 mm
Butt Fusion Injection-Moulded Fittings
End Cap
Butt-fusion end cap for closing line ends.
Ø20 – Ø315 mm
Butt Fusion Injection-Moulded Fittings
Flange Adaptor
For flanged connection of PE lines to valves, pumps and steel equipment.
Ø20 – Ø800 mm
Segmented (Fabricated) Fittings
90° Elbow Segmented
Large-diameter 90° elbow fabricated from pipe segments.
Ø90 – Ø1600 mm
Segmented (Fabricated) Fittings
45° Elbow Segmented
Large-diameter 45° elbow fabricated from pipe segments.
Ø90 – Ø1600 mm
Segmented (Fabricated) Fittings
Equal Tee Segmented
Equal three-way connection for large-diameter lines.
Ø140 – Ø1600 mm
Segmented (Fabricated) Fittings
Reduced Tee Segmented
Reduced branch from a large-diameter main.
Ø110×75 – Ø1000×900 mm
Segmented (Fabricated) Fittings
45° Branch Tee Segmented
45° branch that smooths flow in wastewater and stormwater lines.
Ø110 – Ø630 mm
Segmented (Fabricated) Fittings
Cross Tee Segmented
Segmented cross for four-way distribution points.
Ø90 – Ø630 mm
Flanges & Transition Fittings
Steel Flange (PN10 / PN16)
Steel backing flanges used with flange adaptors, for PE Ø20 – Ø1600.
DN15 – DN1600
Flanges & Transition Fittings
PE-Steel Transition
Connects a PE line to steel pipe with a welded transition; suitable for gas and water lines.
Ø32 (1") – Ø500 (20")
Auxiliary Equipment
Coupler Clamp
Holds pipes in axial alignment during electrofusion welding and prevents slipping.
Auxiliary Equipment
Guillotine Pipe Cutter
Mechanical guillotine cutter for square, clean cuts on PE pipe.
Valves & Fire Hydrants
Metal Seated Gate Valve
Flanged gate valve for shut-off and isolation in network lines.
Valves & Fire Hydrants
Above-ground Fire Hydrant
Above-ground hydrant and operating key for fire water networks.
Valves & Fire Hydrants
Underground Fire Hydrant
Underground fire hydrant that causes no traffic obstruction or visual clutter.
Valves & Fire Hydrants
Double Ball Air Valve
High-flow air release and vacuum prevention during line filling/draining.
Valves & Fire Hydrants
Hydrant Duckfoot Bend
Flanged duckfoot bend used to connect the hydrant to the network.
Valves & Fire Hydrants
Valve Key & Surface Box Set
Extension spindle, protective tube and surface box for operating buried valves from above ground.
No products match your search.
Write to us and we’ll find the right product together.