Butt Welding Machines
63 × 160 Semi-Hydraulic Butt Welding Machine
A light, practical entry model for site and workshop. Runs on single-phase 230 V.
Ø63 – Ø160 mm
Butt Welding Machines
500 × 800 Butt Welding Machine
Safe welding of thick walls with 160 bar working pressure.
Size range: Ø500 – Ø800 mm
Features
- Pressure is adjusted hydraulically; system control is semi-automatic
- Digital heater control, quick-change special-alloy plate heater
- Digital voltmeter on the panel instantly shows supply fluctuations (low / high voltage)
- Additional portable remote handset with 5 m cable
- Facing and emergency stop buttons mounted on the panel
- Pipe is clamped at four points, so there is no axial misalignment
Technical Data
| Diameter range | Ø500 – Ø800 mm |
|---|---|
| Pipe material | HDPE / PP |
| Max. wall thickness | PN32 |
| Heater | 380 V · 10,000 W |
| Facing unit | 380 V · 2.2 kW |
| Hydraulic motor | 380 V · 0.75 kW |
| Power supply | 380 V three-phase |
| Working pressure | 160 bar |
Not sure which size is right for you?Send us the pipe diameter, SDR and application; our expert will advise the right product and stock availability.
0505 954 89 19
From the same group
See all
Similar products
Butt Welding Machines
63 × 160 Full Hydraulic Butt Welding Machine
Full-hydraulic comfort for small diameters: digital heater control and remote handset.
Ø63 – Ø160 mm
Butt Welding Machines
75 × 250 Butt Welding Machine
For the most widely used diameter range in water and gas networks. PVDF compatible.
Ø75 – Ø250 mm
Butt Welding Machines
90 × 315 Butt Welding Machine
Welds up to Ø315 mm on single-phase power; easy to run on site with a generator.
Ø90 – Ø315 mm